![](https://primary.jwwb.nl/public/k/o/s/temp-mfxjgehgnugqhmzpcaqx/y1kxgh/20231106_050137.jpg?enable-io=true&enable=upscale&crop=1919%2C1510%2Cx1%2Cy0%2Csafe&width=413&height=325)
Hello, my crafty friends! Today is Fun Fold Friday and isn't this so pretty?
I loved this DSP which is retired and the only 6 x 6 piece I had. Below are the instructions on how to make this card.
![](https://primary.jwwb.nl/public/k/o/s/temp-mfxjgehgnugqhmzpcaqx/lfjtqs/20231106_045925.jpg?enable-io=true&enable=upscale&crop=1919%2C1770%2Cx0%2Cy0%2Csafe&width=413&height=381)
Fun Fold Measurements and instructions
Base 4 1/4" x 11" scored at 5 1/2"
DSP (Non directional piece best for this layout) First cut at 5 1/4"
Rotate Right and cut at 2 1/4"
Next Cut at 1 7/8" (This should give two pieces at 1 7/8")
Cut one of the 1 7/8" piece on the long side to be 4"
Basic White Cardstock 4" x 5 1/4"
![](https://primary.jwwb.nl/public/k/o/s/temp-mfxjgehgnugqhmzpcaqx/n7kdjr/20231106_045945.jpg?enable-io=true&enable=upscale&crop=1920%2C1785%2Cx0%2Cy0%2Csafe&width=413&height=384)
On the Base (4 1/4" x 11" piece) Cut on short side at 2 1/8" down to 5 1/2" (to score line)
Cut on score line to cut piece of base.
Take the piece cut off and score it at 1" on long side.
![](https://primary.jwwb.nl/public/k/o/s/temp-mfxjgehgnugqhmzpcaqx/bc6v16/20231106_050004.jpg?enable-io=true&enable=upscale&crop=1920%2C2557%2Cx0%2Cy1%2Csafe&width=413&height=550)
Attach to the base approximately 1/2" from the right as shown in picture.
![](https://primary.jwwb.nl/public/k/o/s/temp-mfxjgehgnugqhmzpcaqx/oddju3/20231106_050023.jpg?enable-io=true&enable=upscale&crop=1920%2C2413%2Cx0%2Cy0%2Csafe&width=413&height=519)
Take the Basic white cardstock and attach the DSP piece that measures 2 1/4" to the top of the long side of the basic white as shown in picture.
![](https://primary.jwwb.nl/public/k/o/s/temp-mfxjgehgnugqhmzpcaqx/9ebxok/20231106_050052.jpg?enable-io=true&enable=upscale&crop=1920%2C1357%2Cx0%2Cy0%2Csafe&width=413&height=292)
Adhere the basic white piece to the inside of the base as shown in picture.
![](https://primary.jwwb.nl/public/k/o/s/temp-mfxjgehgnugqhmzpcaqx/515u26/20231106_050115.jpg?enable-io=true&enable=upscale&crop=1919%2C1542%2Cx1%2Cy0%2Csafe&width=413&height=332)
Next, attach the 2 1/8" x 5 1/4" piece to the front of the base as shown in picture.
![](https://primary.jwwb.nl/public/k/o/s/temp-mfxjgehgnugqhmzpcaqx/xekral/20231106_050137-1.jpg?enable-io=true&enable=upscale&crop=1919%2C1510%2Cx1%2Cy0%2Csafe&width=413&height=325)
Lastly, attach the 2 1/8" x 4" piece to flap as shown in picture and add a sentiment to the flap.
Happy Crafting, my friends!
Add comment
Comments
Very nice!
Thanks, Nancy!
I am gonna try this one for sure!
Your istructions are very good! Thankn you!