Hello, my crafty friends! I am back with Part 2 of the Paper Pumpkin May 2023 Exploring In Color Alternate Cards for you today. The first picture is an A2 Card box that will hold ten (10) flat cards and envelopes or five (5) fun fold cards and envelopes. The tutorial to make this box can be found here.
Z FOLD - ALTERNATE FUN FOLD 1
Base CS: 11 x 4.25 scored at 4 and 6.75
Front Panel Mat: 4 x 3.75
Front Scene: 3.75 x 3.50
Middle Panel: 4 x 2.50
Inside Panel Mat: 4 x 4
Inside Panel Scene: 3.75 x 3.75
Scraps for sentiments (I left sentiments off card so I can use them later.)
Step Card Alternate Fun Fold - Card 2
This card turned out to be my favorite because of the depth of the scene with this particular fun fold design. The card looks difficult, but it is super easy to design.
Main Base Cardstock: 4.25 x 9 scored at 1.25, 2.50, 5.75
Scene Front piece: 1 x 4 and 3 x 4
(pay attention to how you cut your scene you will need two (2) of the scene to complete this card.)
Center Base Cardstock: 2.50 x 8.50 scored at 5.50
Scene Piece: 2.25 x 5.25
Inside Cardstock Mat: 4 x 3
Center the piece on the Main Base and adhere to front of card. The back of the Center base piece is adhered to the back of the Main Base Cardstock.
Alternate Fun Fold Card 3
Base Cardstock 9.75 x 4.25 Cut at 1.50 in Start cut at 3" and cut to the 7.5" mark. Then, score from top to cut line. Score at 5.25 top to bottom. Then score from 7.50 from cut line to the bottom.
Mats Cut Dimensions:
2 5/8 x 3 7/8
1 7/8 x 1 1/8 (cut two)
1 7/8 x 2 3/8 (cut two)
1 7/8 x 3 7/8
Scene Cut Dimensions:
2 1/2 x 3 3/4
1 3/4 x 2 1/4 (cut two)
1 3/4 x 1 (cut two)
1 3/4 x 3 3/4
Alternate Fun Fold Card 4
You will need a piece of 12 x 12 coordinating DSP for this project.
DSP: 5.24 x 12 scored at 2, 4, 8, 10
Card Stock Base: 4.25 x 5.5
Inside Mat: 3.75 x 5
On the DSP mark each end at 2" cut from inside score line to mark on each side.
Use the piece cut off for the bottom of the front pieces.
Focal Point Circle Mat: 2.25
Scene Circle: 2"
Inside Scene pieces: 175 by 5.25 (place each piece on the angle and snip to match the angle of the card. Adhere to card.
Add comment
Comments
This kit turned out to be more fun and useful than I originally thought. And your masking tutorial has been really helpful for making the boot into a pair of boots. Nice!